|
Post by dmhikaru on Jul 14, 2007 21:16:44 GMT 9
parts 1. pdi 130 2. km bushing 3. km air seal nozzle (metal) 4. prometheus spring guide w/ bearing (new type) 5. prometheus hard type hop sleeve (red color) 6. bearing taken from broken spring guide ( to be inserted inside the piston) 7. km double o-ring piston head result will be posted soon.. heheheh mokei zombie killer set up....hehhehehe joke lang pang pinas ko ito..
|
|
|
Post by lifes26 on Jul 26, 2007 12:32:50 GMT 9
puweden ilaro yan sa splash... sandali lang palusutin yan...hehehe
|
|
|
Post by dmhikaru on Jul 26, 2007 17:16:22 GMT 9
hahhaha... oo nga noh..kaya lang bro takot ako eh baka sa pulis hindi makalusot.hahhaha.. anyway, using piston head with double Oring is not advisable for pdi130 up to pdi 170. the spring dont have enough force to push the piston back because of too much pressure created by the double Oring. I would suggest use a pdi190 up. I switch to prometheus piston head instead the result is awesome, using poor mans chrono, it punch a hole at the top side of the can. using a spacer will increase the sping power up to 20-30%..
|
|
|
Post by fortminor on Jul 26, 2007 21:48:59 GMT 9
hehehe ok yan bro ,,magkano ba lahat gastos mo dyan?
|
|
|
Post by dmhikaru on Jul 27, 2007 9:22:28 GMT 9
parts 1. prometheus spring guide w/ bearing Y1680 (version 2-8) 2. km airseal nozzle (for m4) Y980 3. km bearing bushing Y940 4. Pdi 130 (bought @ ebay) Y1400 5. prometheus metal piston head w/ bearing Y1680 (note for best result use tm stock cylinder head if you want your gun to sound like a real steel in a distance / if you want your gun to sound noisy & intimidating withut using noveske)
|
|
toti
Airsofter
banana1
Posts: 160
|
Post by toti on Nov 1, 2007 22:46:58 GMT 9
i have 4 190sp prometheus anybody interested?
|
|