|
Post by docas101 on Apr 11, 2008 16:15:34 GMT 9
how to install sector chip- the easiest way without taping the sector chip on with a hammer. materials needed: 1. long nose plier 2. lighter or torch (for heating- optional) 3. portable clamp step 1- prepare the sector gear and sector chip ( I use Big-Out sector chip) note: on the sector chip the letter U stands for UP. the U is always at the up/top position step 2- use a lighter or torch to heat the sector chip for about 5-4 minutes.( this is optional, you can do it even without heating it up) step 3- insert the shaft in the sector chip's super virgin hole. ;D see pic to follow: now. let the strength of the clamp do the rest of the work. ;D step 4- place the sector gear at the right position. do it gently without disturbing the semi attached sector chip. hold the sector gear and gently twist the clamp's knob clockwise. the clamp will pushes the sector chip to the shaft in a smoother way without any pressure from your hands. see pics to follow: ORAMISMO ;D! sector chip is completely installed without any pain in the ass ;D Disclaimer: DO IT AT YOUR OWN RISK
|
|
Torch
Average Airsofter
ASTIG.1521
Posts: 221
|
Post by Torch on Apr 12, 2008 9:04:48 GMT 9
good work dondz...
please keep it up. ;D
|
|